SPEAKER PIECE

شناسه محصول: SD-SPK دسته: , برچسب:

Waterproof IPX7

Replacement speaker piece compatible with our BbTALKIN USA head accessories.

The microphone piece can be replaced on the following head accessories:

B01R: Sports Headset

B01HR: Surf Hat

B01CR and B01CRUS: Baseball Cap

B02R: Single Sided Helmet Speaker Pad

B03R: Double Sided Helmet Speaker Pad

B02G: Single Sided Helmet Speaker Pad for GATH helmet

B10R: Full Face Helmet Headset

WARRANTY:

From the date of purchase, the speaker piece within your headset is covered for 6 months. Please see our warranty section for complete warranty details.

SKU: SD-SPK

EAN: 4713309040306

Plastic Speaker Piece

Three Black Screws

Plastic Slice Tool

Stainless Hook Tool

  • 1. Fresh water rinse after each use.
  • a. Use fresh water to rinse the speaker;
  • b. DO NOT use high pressure spray;
  • c. Place in a ventilated place for drying.
  • 1. For the boom microphone, first remove the Velcro tape. (If you are changing out the speaker on a helmet speaker pad, this is not relevant.)
    2. Take out the screws.
    3. Use the Stainless Steel hook to take out the old speaker.
    4. Pull out the connector.
    5. Install the new speaker:
    A. Aligning the arrow mark to arrow mark;
    B. Insert the new speaker connector;
    C. Insert the plastic slice tool over the O-ring, insert the new speaker and take out the slice tool. ** Important step as this let’s the air out. If this step is skipped, it could cause the sound to be low.
    6. For the boom microphone, place the Velcro tape back onto the speaker area. (If you are changing out the speaker on a helmet speaker pad, this is not relevant.)

x1: Speaker piece
x3: Screws
x1: Plastic slice tool
x1: Stainless hook