TRIPLE EIGHT WATER HELMET – UNIVERSAL

شناسه محصول: TE0350-1 دسته: , , برچسب:

Triple Eight Halo water helmet offered by BbTALKIN USA.  Available in white.

The Sweatsaver liner is installed into your helmet by Velcro.  This allows for the liner to be changed out and replaced by a different size liner.

Our universal helmet options are:

1 helmet with sizes: XS, Small and Medium

OR

1 helmet with sizes: Large and XL

You will need to purchase our Advance Unit + Helmet Speaker Pads to communicate.

If you already have our BbTALKIN units, make sure you have extra helmet mounts so you can attach your unit to your helmet.  If you own existing helmet speaker pads and are moving them to your new Triple Eight helmet, you will need to purchase Velcro to re-fasten the helmet speaker pads.

FEATURES:

• Super comfy Sweatsaver Halo Water Liner constructed with three foam layers wrapped in plush fabric

•  Velcro removable Sweatsaver Liner Insert providing the option for multiple sizes and easy washing care

•  Dual-density closed cell EVA Foam Headliner and Top Crown

•  High-density ABS outer shell

•  Meets CE EN 1385-2012 Water Sport Standard

Sizing:

XS 20.10 – 20.50 in (51 – 52 cm)

S 20.60 – 21.30 in (52 – 54 cm)

M 21.40 – 22.00 in (54 – 56 cm)

L 22.10 in – 22.90 in (56-58 cm)

XL 23.00 – 24.00 in (58 – 61 cm)

Safety Certification:

CE EN 1385 Water Sports

WARRANTY:

From the date of purchase, this helmet is covered for 6 months. Please see our warranty section for complete warranty details.

• Super comfy Sweatsaver Halo Water Liner constructed with three foam layers wrapped in plush fabric

•  Velcro removable Sweatsaver Liner Insert providing the option for multiple sizes and easy washing care

•  Dual-density closed cell EVA Foam Headliner and Top Crown

•  High-density ABS outer shell

•  Meets CE EN 1385-2012 Water Sport Standard

Sizing:

XS 20.10 – 20.50 in (51 – 52 cm)
S 20.60 – 21.30 in (52 – 54 cm)
M 21.40 – 22.00 in (54 – 56 cm)
L 22.10 in – 22.90 in (56-58 cm)
XL 23.00 – 24.00 in (58 – 61 cm)

Safety Certification:

CE EN 1385 Water Sports

Fresh water rinse after each use to avoid corrosion.

HOW TO INSTALL BBTALKIN PRODUCTS ONTO HELMET:

If using in salt water, you must fresh water rinse. Failure to do so can cause corrosion and product failure.

1. Use the alcohol prep to clean up the helmet surface. You must clean the surface of your helmet to insure the 3m tape will adhere to the surface. The 3m tape will not adhere to rubber surfaces.
2. Attach the helmet speaker pad Velcro tape onto the helmet, left and right side just above the helmet ear opening.
3. Run your helmet strap through the elastic band on the helmet speaker pad. This is important! Failure to do this step can cause the rubber to rip on your helmet speaker pad.
4. Install the plastic mount onto the left side of your helmet, just above the helmet speaker pad.
5. Mount the waterproof case into the plastic mount. Make sure both sides of the casing is securely into the mount.
6. Plug in the 3.5mm audio cable. Make sure the cable is tight and secure. Failure to do so will cause water instruction into the casing. Any water damage to the unit within the casing is not covered under warranty.
7. Make sure after each use that your case is secure and sealed.

x1: White Triple Eight Halo Water Helmet

Liners included depend on your selection above.